SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Sep 2011
| THEFT DETERRENT SYSTEM DESCRIPTION |
If the system enters the alarm sounding state, any unlocked doors will automatically lock.
The system has 4 states: disarmed state, arming preparation state, armed and alarm sounding state.
| FUNCTION OF MAIN COMPONENT |
| Function |
Outline |
| Security indicator |
Informs the driver of the theft deterrent system status. |
| Security horn |
Sounds when an attempted break-in or theft is detected. Located in the engine compartment. |
| Hazard warning light |
Begins flashing when an attempted break-in or theft is detected. |
| Vehicle horns |
Sounds when an attempted break-in or theft is detected. |
| Door courtesy light switch |
Detects the door status (open or closed). |
| Door lock position switch |
Detects the door lock status (locked or unlocked). |
| Engine hood courtesy switch |
Detects the engine hood status (open or closed). |
| Back door lock position switch |
Detects the back door lock status (locked or unlocked). |
| Back door courtesy switch |
Detects the back door status (open or closed). |
| Main body ECU |
Detects the ignition switch condition (off, ACC or ON). |
| SYSTEM FUNCTION |
Disarmed state:
- The alarm function is not operating.
- The theft deterrent system is not operating.
- The alarm function is not operating.
Arming preparation state:
- The theft deterrent system is not operating.
- The theft deterrent system is not operating.
Armed state:
- The theft deterrent system is operating.
- The theft deterrent system is operating.
Alarm sounding state:
- The alarm function is operating (30 +/-2.5 seconds).
- The alarm function is operating (30 +/-2.5 seconds).