TERMINALS OF ECM
System information · Vehicles built Sep 2011 – Dec 2011
| CHECK ECM |


- HINT:
- Each ECM terminal standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
- *1: for LHD
- *2: for RHD
- Each ECM terminal standard voltage is shown in the table below.
| Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| A38-21 (L4) - C45-81 (E1)*1 A52-21 (L4) - C46-81 (E1)*2 |
BR-R - BR |
Transfer L4 position signal |
|
Below 1.5 V |
| A38-21 (L4) - C45-81 (E1)*1 A52-21 (L4) - C46-81 (E1)*2 |
BR-R - BR |
Transfer L4 position signal |
|
11 to 14 V |
| A38-5 (TFN) - C45-81 (E1)*1 A52-5 (TFN) - C46-81 (E1)*2 |
G - BR |
Transfer neutral position signal |
|
Below 1.5 V |
| A38-5 (TFN) - C45-81 (E1)*1 A52-5 (TFN) - C46-81 (E1)*2 |
G - BR |
Transfer neutral position signal |
|
11 to 14 V |
| C45-120 (NSW) - C45-81 (E1)*1 C46-120 (NSW) - C46-81 (E1)*2 |
L - BR |
PNP switch signal |
|
Below 1.5 V |
| C45-120 (NSW) - C45-81 (E1)*1 C46-120 (NSW) - C46-81 (E1)*2 |
L - BR |
PNP switch signal |
|
11 to 14 V |
| C45-2 (P) - C45-81 (E1)*1 C46-2 (P) - C46-81 (E1)*2 |
G-B - BR |
P shift position switch signal |
|
11 to 14 V |
| C45-2 (P) - C45-81 (E1)*1 C46-2 (P) - C46-81 (E1)*2 |
G-B - BR |
P shift position switch signal |
|
Below 1.5 V |
| C45-26 (R) - C45-81 (E1)*1 C46-26 (R) - C46-81 (E1)*2 |
L-R - BR |
R shift position switch signal |
|
11 to 14 V |
| C45-26 (R) - C45-81 (E1)*1 C46-26 (R) - C46-81 (E1)*2 |
L-R - BR |
R shift position switch signal |
|
Below 1.5 V |
| C45-25 (N) - C45-81 (E1)*1 C46-25 (N) - C46-81 (E1)*2 |
G-W - BR |
N shift position switch signal |
|
11 to 14 V |
| C45-25 (N) - C45-81 (E1)*1 C46-25 (N) - C46-81 (E1)*2 |
G-W - BR |
N shift position switch signal |
|
Below 1.5 V |
| C45-27 (D) - C45-81 (E1)*1 C46-27 (D) - C46-81 (E1)*2 |
G - BR |
D shift position switch signal |
|
11 to 14 V |
| C45-27 (D) - C45-81 (E1)*1 C46-27 (D) - C46-81 (E1)*2 |
G - BR |
D shift position switch signal |
|
Below 1.5 V |
| A38-25 (S) - C45-81 (E1)*1 A52-25 (S) - C46-81 (E1)*2 |
W - BR |
S shift position switch signal |
|
11 to 14 V |
| A38-25 (S) - C45-81 (E1)*1 A52-25 (S) - C46-81 (E1)*2 |
W - BR |
S shift position switch signal |
|
Below 1 V |
| A38-38 (SFTU) - C45-81 (E1)*1 A52-38 (SFTU) - C46-81 (E1)*2 |
Y - BR |
Up-shift shift position switch signal |
|
11 to 14 V |
| A38-38 (SFTU) - C45-81 (E1)*1 A52-38 (SFTU) - C46-81 (E1)*2 |
Y - BR |
Up-shift shift position switch signal |
|
Below 1 V |
| A38-27 (SFTD) - C45-81 (E1)*1 A52-27 (SFTD) - C46-81 (E1)*2 |
L - BR |
Down-shift position switch signal |
|
11 to 14 V |
| A38-27 (SFTD) - C45-81 (E1)*1 A52-27 (SFTD) - C46-81 (E1)*2 |
L - BR |
Down-shift position switch signal |
|
Below 1 V |
| A38-36 (STP) - C45-81 (E1)*1 A52-36 (STP) - C46-81 (E1)*2 |
R - BR |
Stop light switch signal |
Brake pedal depressed |
11 to 14 V |
| A38-36 (STP) - C45-81 (E1)*1 A52-36 (STP) - C46-81 (E1)*2 |
R - BR |
Stop light switch signal |
Brake pedal released |
Below 1.5 V |
| C45-7 (S1) - C45-81 (E1)*1 C46-7 (S1) - C46-81 (E1)*2 |
R - BR |
Shift solenoid valve S1 signal |
Engine switch on (IG) |
11 to 14 V |
| C45-7 (S1) - C45-81 (E1)*1 C46-7 (S1) - C46-81 (E1)*2 |
R - BR |
Shift solenoid valve S1 signal |
1st or 2nd gear |
11 to 14 V |
| C45-7 (S1) - C45-81 (E1)*1 C46-7 (S1) - C46-81 (E1)*2 |
R - BR |
Shift solenoid valve S1 signal |
3rd, 4th or 5th gear |
Below 1.5 V |
| C45-4 (S2) - C45-81 (E1)*1 C46-4 (S2) - C46-81 (E1)*2 |
W - BR |
Shift solenoid valve S2 signal |
Engine switch on (IG) |
Below 1.5 V |
| C45-4 (S2) - C45-81 (E1)*1 C46-4 (S2) - C46-81 (E1)*2 |
W - BR |
Shift solenoid valve S2 signal |
2nd or 3rd gear |
11 to 14 V |
| C45-4 (S2) - C45-81 (E1)*1 C46-4 (S2) - C46-81 (E1)*2 |
W - BR |
Shift solenoid valve S2 signal |
1st, 4th or 5th gear |
Below 1.5 V |
| C45-6 (SR) - C45-81 (E1)*1 C46-6 (SR) - C46-81 (E1)*2 |
G - BR |
Shift solenoid valve SR signal |
Engine switch on (IG) |
Below 1.5 V |
| C45-6 (SR) - C45-81 (E1)*1 C46-6 (SR) - C46-81 (E1)*2 |
G - BR |
Shift solenoid valve SR signal |
5th gear |
11 to 14 V |
| C45-6 (SR) - C45-81 (E1)*1 C46-6 (SR) - C46-81 (E1)*2 |
G - BR |
Shift solenoid valve SR signal |
1st gear |
Below 1 V |
| C45-14 (SL1+) - C45-15 (SL1-)*1 C46-14 (SL1+) - C46-15 (SL1-)*2 |
Y - L |
Shift solenoid valve SL1 signal |
Engine idling |
Pulse generation (see waveform 1) |
| C45-12 (SL2+) - C45-13 (SL2-)*1 C46-12 (SL2+) - C46-13 (SL2-)*2 |
G-R - L-W |
Shift solenoid valve SL2 signal |
Engine idling |
Pulse generation (see waveform 2) |
| C45-9 (SLT+) - C45-8 (SLT-)*1 C46-9 (SLT+) - C46-8 (SLT-)*2 |
B - G-B |
Shift solenoid valve SLT signal |
Engine idling |
Pulse generation (see waveform 3) |
| C45-10 (SLU+) - C45-11 (SLU-)*1 C46-10 (SLU+) - C46-11 (SLU-)*2 |
L-Y - L-R |
Shift solenoid valve SLU signal |
4th (lock-up) gear or 5th (lock-up) gear |
Pulse generation (see waveform 4) |
| C45-122 (THO1) - C45-98 (ETHA)*1 C46-122 (THO1) - C46-98 (ETHA)*2 |
G-Y - BR |
No. 1 ATF temperature sensor signal |
No. 1 ATF temperature: 115°C (239°F) or higher |
Below 1.5 V |
| C45-99 (THO2) - C45-98 (ETHA)*1 C46-99 (THO2) - C46-98 (ETHA)*2 |
L - BR |
No. 2 ATF temperature sensor signal |
No. 2 ATF temperature: 115°C (239°F) or higher |
Below 1.5 V |
| C45-101 (SP2+) - C45-100 (SP2-)*1 C46-101 (SP2+) - C46-100 (SP2-)*2 |
Y - B |
Speed sensor SP2 signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (see waveform 5) |
| C45-124 (NT+) - C45-123 (NT-)*1 C46-124 (NT+) - C46-123 (NT-)*2 |
Y - B |
Speed sensor NT signal |
Engine idling (Shift lever in P or N) |
Pulse generation (see waveform 6) |
| A38-10 (CANH) - C45-81 (E1)*1 A52-10 (CANH) - C46-81 (E1)*2 |
P - BR |
CAN communication line |
Engine switch on (IG) |
Pulse generation (see waveform 7) |
| A38-11 (CANL) - C45-81 (E1)*1 A52-11 (CANL) - C46-81 (E1)*2 |
B - BR |
CAN communication line |
Engine switch on (IG) |
Pulse generation (see waveform 8) |
| A38-51 (PWR) - C45-81 (E1)*1 A52-51 (PWR) - C46-81 (E1)*2 |
L-B - BR |
Pattern select (PWR) switch signal |
|
11 to 14 V |
| A38-51 (PWR) - C45-81 (E1)*1 A52-51 (PWR) - C46-81 (E1)*2 |
L-B - BR |
Pattern select (PWR) switch signal |
|
Below 1.5 V |
| A38-4 (SNWI) - C45-81 (E1)*1 A52-4 (SNWI) - C46-81 (E1)*2 |
R - BR |
Pattern select (2ND) switch signal |
|
11 to 14 V |
| A38-4 (SNWI) - C45-81 (E1)*1 A52-4 (SNWI) - C46-81 (E1)*2 |
R - BR |
Pattern select (2ND) switch signal |
|
Below 1.5 V |
| A38-13 (SPD) - C45-81 (E1)*1 A52-13 (SPD) - C46-81 (E1)*2 |
V-R - BR |
Speed signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (see waveform 9) |
Using an oscilloscope, check waveform 1.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-14 (SL1+) - C45-15 (SL1-)*1
C46-14 (SL1+) - C46-15 (SL1-)*2
5 V/DIV., 1 msec./DIV.
Engine idling
Using an oscilloscope, check waveform 2.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-12 (SL2+) - C45-13 (SL2-)*1
C46-12 (SL2+) - C46-13 (SL2-)*2
5 V/DIV., 1 msec./DIV.
Engine idling
Using an oscilloscope, check waveform 3.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-9 (SLT+) - C45-8 (SLT-)*1
C46-9 (SLT+) - C46-8 (SLT-)*2
5 V/DIV., 1 msec./DIV.
Engine idling
Using an oscilloscope, check waveform 4.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-10 (SLU+) - C45-11 (SLU-)*1
C46-10 (SLU+) - C46-11 (SLU-)*2
5 V/DIV., 1 msec./DIV.
5th (lock-up)
Using an oscilloscope, check waveform 5.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-101 (SP2+) - C45-100 (SP2-)*1
C46-101 (SP2+) - C46-100 (SP2-)*2
2 V/DIV., 20 msec./DIV.
Vehicle speed 20 km/h (12 mph)
Using an oscilloscope, check waveform 6.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
C45-124 (NT+) - C45-123 (NT-)*1
C46-124 (NT+) - C46-123 (NT-)*2
1 V/DIV., 2 msec./DIV.
Engine idling (Shift lever in P or N)
Using an oscilloscope, check waveform 7.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
A38-10 (CANH) - C45-81 (E1)*1
A52-10 (CANH) - C46-81 (E1)*2
1 V/DIV., 10 μsec./DIV.
Engine switch on (IG)
Using an oscilloscope, check waveform 8.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
A38-11 (CANL) - C45-81 (E1)*1
A52-11 (CANL) - C46-81 (E1)*2
1 V/DIV., 10 μsec./DIV.
Engine switch on (IG)
Using an oscilloscope, check waveform 9.

Reference: Terminal No. (Symbol)
Tool Setting
Condition
A38-13 (SPD) - C45-81 (E1)*1
A52-13 (SPD) - C46-81 (E1)*2
5 V/DIV., 20 msec./DIV.
Vehicle speed 20 km/h (12 mph)