2011-2013 Land Cruiser · Service Manual Drivetrain

TERMINALS OF ECM

System information · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK ECM
C176147E05

HINT:
Each ECM terminal standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.

Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A38-21 (L4) - C45-81 (E1)
BR-R - BR
Transfer L4 position signal
  1. Engine switch on (IG)
  2. Transfer position switch on L4
Below 1.5 V
A38-21 (L4) - C45-81 (E1)
BR-R - BR
Transfer L4 position signal
  1. Engine switch on (IG)
  2. Transfer position switch not on L4
11 to 14 V
A38-5 (TFN) - C45-81 (E1)
G - BR
Transfer neutral position signal
  1. Engine switch on (IG)
  2. Transfer position in neutral
Below 1.5 V
A38-5 (TFN) - C45-81 (E1)
G - BR
Transfer neutral position signal
  1. Engine switch on (IG)
  2. Transfer position not in neutral
11 to 14 V
C45-62 (NSW) - C45-81 (E1)
L - BR
PNP switch signal
  1. Engine switch on (IG)
  2. Shift lever in P or N
Below 1.5 V
C45-62 (NSW) - C45-81 (E1)
L - BR
PNP switch signal
  1. Engine switch on (IG)
  2. Shift lever not in P or N
11 to 14 V
C45-24 (P) - C45-81 (E1)
G-B - BR
P shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in P
11 to 14 V
C45-24 (P) - C45-81 (E1)
G-B - BR
P shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever not in P
Below 1.5 V
C45-25 (R) - C45-81 (E1)
L-R - BR
R shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in R
11 to 14 V
C45-25 (R) - C45-81 (E1)
L-R - BR
R shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever not in R
Below 1.5 V
C45-27 (N) - C45-81 (E1)
G-W - BR
N shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in N
11 to 14 V
C45-27 (N) - C45-81 (E1)
G-W - BR
N shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever not in N
Below 1.5 V
C45-26 (D) - C45-81 (E1)
G - BR
D shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in D
11 to 14 V
C45-26 (D) - C45-81 (E1)
G - BR
D shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever not in D
Below 1.5 V
A38-25 (S) - C45-81 (E1)
W - BR
S shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in S
11 to 14 V
A38-25 (S) - C45-81 (E1)
W - BR
S shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever not in S
Below 1 V
A38-16 (SFTU) - C45-81 (E1)
Y - BR
Up-shift shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in S
11 to 14 V
A38-16 (SFTU) - C45-81 (E1)
Y - BR
Up-shift shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in "+" position (up-shift)
Below 1 V
A38-51 (SFTD) - C45-81 (E1)
L - BR
Down-shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in S
11 to 14 V
A38-51 (SFTD) - C45-81 (E1)
L - BR
Down-shift position switch signal
  1. Engine switch on (IG)
  2. Shift lever in "-" position (down-shift)
Below 1 V
A38-36 (STP) - C45-81 (E1)
R - BR
Stop light switch signal
Brake pedal depressed
11 to 14 V
A38-36 (STP) - C45-81 (E1)
R - BR
Stop light switch signal
Brake pedal released
Below 1.5 V
C45-9 (S1) - C45-81 (E1)
R - BR
Shift solenoid valve S1 signal
Engine switch on (IG)
11 to 14 V
C45-9 (S1) - C45-81 (E1)
R - BR
Shift solenoid valve S1 signal
1st or 2nd gear
11 to 14 V
C45-9 (S1) - C45-81 (E1)
R - BR
Shift solenoid valve S1 signal
3rd, 4th or 5th gear
Below 1.5 V
C45-7 (S2) - C45-81 (E1)
W - BR
Shift solenoid valve S2 signal
Engine switch on (IG)
Below 1.5 V
C45-7 (S2) - C45-81 (E1)
W - BR
Shift solenoid valve S2 signal
2nd or 3rd gear
11 to 14 V
C45-7 (S2) - C45-81 (E1)
W - BR
Shift solenoid valve S2 signal
1st, 4th or 5th gear
Below 1.5 V
C45-8 (SR) - C45-81 (E1)
G - BR
Shift solenoid valve SR signal
Engine switch on (IG)
Below 1.5 V
C45-8 (SR) - C45-81 (E1)
G - BR
Shift solenoid valve SR signal
5th gear
11 to 14 V
C45-8 (SR) - C45-81 (E1)
G - BR
Shift solenoid valve SR signal
1st gear
Below 1 V
C45-16 (SL1+) - C45-17 (SL1-)
Y - L
Shift solenoid valve SL1 signal
Engine idling
Pulse generation
(see waveform 1)
C45-14 (SL2+) - C45-15 (SL2-)
G-R - L-W
Shift solenoid valve SL2 signal
Engine idling
Pulse generation
(see waveform 2)
C45-11 (SLT+) - C45-10 (SLT-)
B - G-B
Shift solenoid valve SLT signal
Engine idling
Pulse generation
(see waveform 3)
C45-12 (SLU+) - C45-13 (SLU-)
L-Y - L-R
Shift solenoid valve SLU signal
4th (lock-up) gear or 5th (lock-up) gear
Pulse generation
(see waveform 4)
C45-126 (THO1) - C45-78 (ETHW)
G-Y - BR
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
C45-125 (THO2) - C45-78 (ETHW)
L - BR
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
C45-4 (SP2+) - C45-3 (SP2-)
Y - B
Speed sensor SP2 signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 5)
C45-6 (NT+) - C45-5 (NT-)
Y - B
Speed sensor NT signal
Engine idling
(Shift lever in P or N)
Pulse generation
(see waveform 6)
A38-41 (CANH) - C45-81 (E1)
P - BR
CAN communication line
Engine switch on (IG)
Pulse generation
(see waveform 7)
A38-49 (CANL) - C45-81 (E1)
B - BR
CAN communication line
Engine switch on (IG)
Pulse generation
(see waveform 8)
A38-47 (PWR) - C45-81 (E1)
L-B - BR
Pattern select (PWR) switch signal
  1. Engine switch on (IG)
  2. Pattern select (PWR) switch off
11 to 14 V
A38-47 (PWR) - C45-81 (E1)
L-B - BR
Pattern select (PWR) switch signal
  1. Engine switch on (IG)
  2. Pattern select (PWR) switch on
Below 1.5 V
A38-17 (SNWI) - C45-81 (E1)
R - BR
Pattern select (2ND) switch signal
  1. Engine switch on (IG)
  2. Pattern select (2ND) switch off
11 to 14 V
A38-17 (SNWI) - C45-81 (E1)
R - BR
Pattern select (2ND) switch signal
  1. Engine switch on (IG)
  2. Pattern select (2ND) switch continuously pressed
Below 1.5 V

  1. C175011E01
    Using an oscilloscope, check waveform 1.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-16 (SL1+) - C45-17 (SL1-)
    5 V/DIV., 1 msec./DIV.
    Engine idling

  2. C175011E01
    Using an oscilloscope, check waveform 2.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-14 (SL2+) - C45-15 (SL2-)
    5 V/DIV., 1 msec./DIV.
    Engine idling

  3. C175011E01
    Using an oscilloscope, check waveform 3.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-11 (SLT+) - C45-10 (SLT-)
    5 V/DIV., 1 msec./DIV.
    Engine idling

  4. C175011E01
    Using an oscilloscope, check waveform 4.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-12 (SLU+) - C45-13 (SLU-)
    5 V/DIV., 1 msec./DIV.
    5th (lock-up)

  5. C175013E03
    Using an oscilloscope, check waveform 5.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-4 (SP2+) - C45-3 (SP2-)
    2 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)

  6. C175014E01
    Using an oscilloscope, check waveform 6.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-6 (NT+) - C45-5 (NT-)
    1 V/DIV., 2 msec./DIV.
    Engine idling (Shift lever in P or N)

  7. C175015E01
    Using an oscilloscope, check waveform 7.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A38-41 (CANH) - C45-81 (E1)
    1 V/DIV., 10 μsec./DIV.
    Engine switch on (IG)

  8. C175016E01
    Using an oscilloscope, check waveform 8.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A38-49 (CANL) - C45-81 (E1)
    1 V/DIV., 10 μsec./DIV.
    Engine switch on (IG)

← PROBLEM SYMPTOMS TABLE (from Jan 2012)TERMINALS OF ECM (from Jan 2012) →