2011-2013 Land Cruiser · Service Manual Drivetrain

TERMINALS OF ECM

System information · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK ECM
A182253E02

HINT:
  1. Each ECM terminal standard voltage is shown in the table below.
    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
    Use the illustration above as a reference for the ECM terminals.
  2. *1: for LHD
  3. *2: for RHD

Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A38-21 (L4) - C45-81 (E1)*1
A52-21 (L4) - C46-81 (E1)*2
BR-R - BR
Transfer L4 position signal
  1. Ignition switch ON
  2. Transfer position switch on L4
Below 1.5 V
  1. Ignition switch ON
  2. Transfer position switch not on L4
11 to 14 V
A38-39 (TFN) - C45-81 (E1)*1
A52-39 (TFN) - C46-81 (E1)*2
G - BR
Transfer neutral position signal
  1. Ignition switch ON
  2. Transfer position in neutral
Below 1.5 V
  1. Ignition switch ON
  2. Transfer position not in neutral
11 to 14 V
A38-43 (NSW) - C45-81 (E1)*1
A52-43 (NSW) - C46-81 (E1)*2
L - BR
PNP switch signal
  1. Ignition switch ON
  2. Shift lever in P or N
Below 1 V
  1. Ignition switch ON
  2. Shift lever not in P or N
11 to 14 V
C45-31 (P) - C45-81 (E1)*1
C46-31 (P) - C46-81 (E1)*2
G-B - BR
P shift position switch signal
  1. Ignition switch ON
  2. Shift lever in P
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in P
Below 1 V
C45-30 (R) - C45-81 (E1)*1
C46-30 (R) - C46-81 (E1)*2
L-R - BR
R shift position switch signal
  1. Ignition switch ON
  2. Shift lever in R
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in R
Below 1 V
C45-29 (N) - C45-81 (E1)*1
C46-29 (N) - C46-81 (E1)*2
G-W - BR
N shift position switch signal
  1. Ignition switch ON
  2. Shift lever in N
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in N
Below 1 V
C45-28 (D) - C45-81 (E1)*1
C46-28 (D) - C46-81 (E1)*2
G - BR
D shift position switch signal
  1. Ignition switch ON
  2. Shift lever in D
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in D
Below 1 V
A38-25 (S) - C45-81 (E1)*1
A52-25 (S) - C46-81 (E1)*2
W - BR
S shift position switch signal
  1. Ignition switch ON
  2. Shift lever in S
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in S
Below 1 V
A38-60 (SFTU) - C45-81 (E1)*1
A52-60 (SFTU) - C46-81 (E1)*2
Y - BR
Up-shift shift position switch signal
  1. Ignition switch ON
  2. Shift lever in S
11 to 14 V
  1. Ignition switch ON
  2. Shift lever "+" position (up-shift)
Below 1 V
A38-59 (SFTD) - C45-81 (E1)*1
A52-59 (SFTD) - C46-81 (E1)*2
L - BR
Down-shift position switch signal
  1. Ignition switch ON
  2. Shift lever in S
11 to 14 V
  1. Ignition switch ON
  2. Shift lever "-" position (down-shift)
Below 1 V
A38-36 (STP) - C45-81 (E1)*1
A52-36 (STP) - C46-81 (E1)*2
R - BR
Stop light switch signal
Brake pedal depressed
11 to 14 V
Brake pedal released
Below 1.5 V
C45-9 (S1) - C45-81 (E1)*1
C46-9 (S1) - C46-81 (E1)*2
R - BR
Shift solenoid valve S1 signal
1st gear
Below 1 V
Not in 1st gear
11 to 14 V
C45-8 (S2) - C45-81 (E1)*1
C46-8 (S2) - C46-81 (E1)*2
W - BR
Shift solenoid valve S2 signal
1st, 2nd or 6th gear
11 to 14 V
3rd, 4th or 5th gear
Below 1 V
C45-7 (S3) - C45-81 (E1)*1
C46-7 (S3) - C46-81 (E1)*2
B-R - BR
Shift solenoid valve S3 signal
1st, 2nd or 3rd gear
11 to 14 V
4th, 5th or 6th gear
Below 1 V
C45-6 (S4) - C45-81 (E1)*1
C46-6 (S4) - C46-81 (E1)*2
G-R - BR
Shift solenoid valve S4 signal
5th or 6th gear
11 to 14 V
1st, 2nd, 3rd or 4th gear
Below 1 V
C45-5 (SR) - C45-81 (E1)*1
C46-5 (SR) - C46-81 (E1)*2
G - BR
Shift solenoid valve SR signal
1st, 2nd, 3rd or 4th gear
11 to 14 V
5th or 6th gear
Below 1 V
C45-13 (SL1+) - C45-12 (SL1-)*1
C46-13 (SL1+) - C46-12 (SL1-)*2
Y - L
Shift solenoid valve SL1 signal
5th or 6th gear
Pulse generation
C45-17 (SL2+) - C45-16 (SL2-)*1
C46-17 (SL2+) - C46-16 (SL2-)*2
G-R - L-W
Shift solenoid valve SL2 signal
Engine idling
Pulse generation
C45-11 (SLT+) - C45-10 (SLT-)*1
C46-11 (SLT+) - C46-10 (SLT-)*2
B - G-B
Shift solenoid valve SLT signal
Engine idling
Pulse generation
C45-15 (SLU+) - C45-14 (SLU-)*1
C46-15 (SLU+) - C46-14 (SLU-)*2
L-Y - L-R
Shift solenoid valve SLU signal
5th (lock-up) gear or 6th (lock-up) gear
Pulse generation
C45-123 (THO1) - C45-122 (ETHA)*1
C46-123 (THO1) - C46-122 (ETHA)*2
G-Y - BR
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
C45-121 (THO2) - C45-122 (ETHA)*1
C46-121 (THO2) - C46-122 (ETHA)*2
L - BR
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
C45-68 (SP2+) - C45-67 (SP2-)*1
C46-68 (SP2+) - C46-67 (SP2-)*2
Y - B
Speed sensor SP2 signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 1)
C45-4 (NT+) - C45-3 (NT-)*1
C46-4 (NT+) - C46-3 (NT-)*2
Y - B
Speed sensor NT signal
Engine idling
(shift lever in P or N)
Pulse generation
(see waveform 2)
A38-41 (CANH) - C45-81 (E1)*1
A52-41 (CANH) - C46-81 (E1)*2
P - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 3)
A38-49 (CANL) - C45-81 (E1)*1
A52-49 (CANL) - C46-81 (E1)*2
B - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 4)
A38-47 (PWR) - C45-81 (E1)*1
A52-47 (PWR) - C46-81 (E1)*2
L-B - BR
Pattern select (PWR) switch signal
  1. Ignition switch ON
  2. Pattern select (PWR) switch off
11 to 14 V
  1. Ignition switch ON
  2. Pattern select (PWR) switch on
Below 1.5 V
A38-17 (SNWI) - C45-81 (E1)*1
A52-17 (SNWI) - C46-81 (E1)*2
P-L - BR
Pattern select (2ND) switch signal
  1. Ignition switch ON
  2. Pattern select (2ND) switch off
11 to 14 V
  1. Ignition switch ON
  2. Pattern select (2ND) switch continuously pressed
Below 1.5 V
A38-8 (SPD) - C45-81 (E1)*1
A52-8 (SPD) - C46-81 (E1)*2
V-R - BR
Speed signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 5)

  1. C175013E01
    Using an oscilloscope, check waveform 1.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-68 (SP2+) - C45-67 (SP2-)*1
    C46-68 (SP2+) - C46-67 (SP2-)*2
    2 V/DIV., 2 msec./DIV.
    Vehicle speed 20 km/h (12 mph)

  2. C175014E01
    Using an oscilloscope, check waveform 2.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    C45-4 (NT+) - C45-3 (NT-)*1
    C46-4 (NT+) - C46-3 (NT-)*2
    1 V/DIV., 2 msec./DIV.
    Engine idling (shift lever in P or N)

  3. C175015E01
    Using an oscilloscope, check waveform 3.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A38-41 (CANH) - C45-81 (E1)*1
    A52-41 (CANH) - C46-81 (E1)*2
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON

  4. C175016E01
    Using an oscilloscope, check waveform 4.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A38-49 (CANL) - C45-81 (E1)*1
    A52-49 (CANL) - C46-81 (E1)*2
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON

  5. C170574E02
    Using an oscilloscope, check waveform 5.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A38-8 (SPD) - C45-81 (E1)*1
    A52-8 (SPD) - C46-81 (E1)*2
    5 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)

← TERMINALS OF ECM (Sep 2011 – Dec 2011)DIAGNOSIS SYSTEM (Sep 2011 – Dec 2011) →