2011-2013 Land Cruiser · Service Manual Drivetrain

MANUAL SHIFTING TEST

Troubleshooting · Vehicles built Sep 2011 – Dec 2011


MANUAL SHIFTING TEST

HINT:
  1. Through this test, it can be determined whether the trouble occurs in an electrical circuit or if it is a mechanical problem in the transmission.
  2. If any abnormalities are found in the following test, the problem is in the transmission itself.

  1. C172514
    Disconnect the connector of the transmission wire.

    HINT:
    It is possible to deactivate the electrical shift control by disconnecting the transmission wire. The gear positions can then be changed mechanically with the shift lever.

  2. Drive with the transmission wire disconnected. Move the shift lever to each position to check whether the gear position changes as shown in the table below.

    Shift Lever Position
    Gear Position
    P
    P
    R
    R
    D
    4th

  3. Connect the connector of the transmission wire.

  4. Clear the DTC (Click here).

← HYDRAULIC TEST (Sep 2011 – Dec 2011)INITIALIZATION (Sep 2011 – Dec 2011) →