CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Select: Body / Door Lock / Utility / Customize /
Select the setting by referring to the table below.
Door Lock Display
Default
Contents
Setting
Unlock Key Twice
OFF
Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors.
ON/OFF
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle.
Select the setting by referring to the table below.
Door lock settings Display
Default
Contents
Setting
Unlock on second key turn
OFF
Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors.
ON/OFF