CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Sep 2011
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize.
Select the setting by referring to the table below.
Wireless Door Lock Display (item)
Default
Function
Setting
Wireless Control
ON
The function that turns the wireless door lock on or off.
ON or OFF
Hazard Answer Back
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice.
ON or OFF
Open Door Warning
ON
If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.
ON or OFF
Auto Lock Time
30 s
The function that changes the time until relocking after unlocking the doors with the wireless door lock function.
30 s, 60 s or 120 s
Wireless Buzzer Resp
ON
This function turns the wireless door lock buzzer response on or off.
ON or OFF