CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Wireless Door Lock Display
Default
Contents
Setting
Hazard Answer Back
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
ON/OFF
Wireless Control
ON
Function that turns the wireless door lock function ON or OFF.
ON/OFF
Open Door Warning*1
ON
If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.
ON/OFF
Panic Alarm Function*2
ON
Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds.
ON/OFF
Unlock 2 Operation
OFF
Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
ON/OFF
Auto Lock Time
30 s
Function to change the time until relocking after unlocking with the wireless door lock function.
30 s/60 s/120 s
Wireless Auto Lock
ON
Function to control the automatic relocking of doors after unlocking with the wireless door lock function.
ON/OFF
Wireless Buzzer Resp
ON*3
Wireless buzzer response function.
ON/OFF
Wireless Buzzer Volume
Level 7
This function changes the wireless buzzer volume.
Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7
- HINT:
- *1: Except China
- *2: w/ Panic Switch
- *3: Except Europe and China
PSD & PBD Operation (w/ Power Back Door System) Display
Default
Contents
Setting
Wireless PBD Operation
0.8 s
1Motion*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
Function to turn on/off the power back door wireless one motion open operation.*
1 Oper or 2 Oper or 0.8 s or OFF
1Motion or 1 Oper or 2 Oper or 0.8 s or OFF*
- HINT:
- *: Except Europe
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Turn the engine switch on (IG).
Enter the following menus: Setup / Vehicle.
Select the setting by referring to the table below.
Door lock settings Display
Default
Contents
Setting
Remote 2-press unlock
OFF
Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
ON/OFF
Lock/unlock feedback lights
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
ON/OFF
Lock feedback volume
Level 7
This function changes the wireless buzzer volume.
Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7