2011-2013 Land Cruiser · Service Manual Steering

SYSTEM DIAGRAM

System information · Vehicles built from Sep 2011

C177645E01
C177646E01
C177646E02
Communication Table: 
Sender
Receiver
Signal
Line
Main Body ECU
Multiplex Tilt and Telescopic ECU
  1. Engine switch signal
  2. Key switch signal
  3. Key signal for push start system
CAN
Multiplex Tilt and Telescopic ECU
Front Power Seat Switch LH*1 or RH*2 (Position Control ECU)
  1. Tilt and telescopic execution signal
  2. Tilt and telescopic completion signal
CAN
Front Power Seat Switch LH*1 or RH*2 (Position Control ECU)
Multiplex Tilt and Telescopic ECU
  1. Memory command of memory 1 for driver seat
  2. Memory command of memory 2 for driver seat
  3. Memory command of memory 3 for driver seat
  4. Play command of memory 1 for driver seat
  5. Play command of memory 2 for driver seat
  6. Play command of memory 3 for driver seat
  7. Start signal to play tilt and Telescopic steering
  8. Stop signal to play tilt and Telescopic steering
CAN
Combination Meter ECU
Multiplex Tilt and Telescopic ECU
Vehicle speed signal
CAN
Tilt and Telescopic Manual Switch
Multiplex Tilt and Telescopic ECU
Tilt and telescopic manual switch signal
Serial

HINT:
*1: for LHD
*2: for RHD

← PARTS LOCATION (from Sep 2011)SYSTEM DESCRIPTION (from Sep 2011) →