CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Sep 2011
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Utility / Customize.
Select the setting by referring to the table below.
Entry & Start Display
Default
Content
Setting
Ignition Available Area
All
Function to choose the available area for the key to start the engine and cancel the steering lock.
Front/All