2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT IGNITION SWITCH ASSEMBLY

  1. A172122E05
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    All combinations of all terminals
    LOCK
    10 kΩ or higher
    4 (AM1) - 2 (ACC)
    ACC
    Below 1 Ω
    4 (AM1) - 2 (ACC)
    4 (AM1) - 1 (IG1)
    5 (AM2) - 6 (IG2)
    ON
    4 (AM1) - 1 (IG1)
    4 (AM1) - 3 (ST1)
    5 (AM2) - 6 (IG2)
    START

    If the result is not as specified, replace the switch assembly.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →