CD cannot be Inserted or is Ejected Right After Insertion
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
| 1. CHECK IF PROPER CD IS INSERTED |
 |
Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.
- OK:
- Normal audio CD.
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK THAT CD IS INSERTED PROPERLY |
 |
Check whether or not the CD is inserted upside down.
- OK:
- CD is properly inserted.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CLEAN CD |
 |
- Clean the disc by wiping the CD underside radially with a soft cloth.
- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. REPLACE CD WITH ANOTHER AND RECHECK |
 |
Replace the CD with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
|