2011-2013 Land Cruiser · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C170828
  1. Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.


2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Disconnect the switch connector.

  1. C170829
    Remove the nut, spring washer and transmission control shaft lever RH.

  1. Remove the collar and transmission control rod bush from the transmission control shaft lever RH.

  1. C155870
    Using a screwdriver, bend the tabs of the lock washer.

  1. C155871
    Remove the lock nut and lock washer.

  1. C155872
    Remove the bolt and switch.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.

← ON-VEHICLE INSPECTION (from Sep 2011)INSPECTION (from Sep 2011) →