REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1.
REMOVE ASSIST GRIP RH
|
 |
- Using a screwdriver, detach the 2 claws and open the 2 covers.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective Tape
|
- Remove the 2 bolts and assist grip.
| 2.
REMOVE BACK DOOR TRIM COVER RH
|
 |
- Detach the 5 clips and 2 claws.
- Detach the clamp and 2 claws and remove the back door trim cover.
| 3.
REMOVE BACK DOOR TRIM PANEL ASSEMBLY RH
|
 |
- Detach the 13 clips and remove the back door trim panel.
| 4.
REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
 |
Open the wiper arm head cap.
- Remove the nut and remove the rear wiper arm and blade assembly.
| 5.
REMOVE REAR WIPER MOTOR ASSEMBLY |
 |
- Disconnect the connector.
Remove the 3 bolts and rear wiper motor assembly.
| 6.
REMOVE REAR WIPER MOTOR GROMMET |
 |
- Remove the rear wiper motor grommet.