2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT CANISTER

  1. A179221E02
    Visually check the canister for cracks or damage.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    *3
    Port C
    V100135
    Air

  1. Blow compressed air of 4.9 kPa (50 gf/cm2, 0.71 psi) into port A and check that air flows without resistance from port B and port C.
    If the result is not as specified, replace the canister.

  1. Apply a vacuum of 1.96 kPa (20 gf/cm2, 0.28 psi) to port A. Check that the vacuum does not decrease when ports B and C are closed, and check that the vacuum does not decrease when port B is released.
    If the result is not as specified, replace the canister.


CLEAN FILTER IN CANISTER

  1. A179222E02
    Clean the filter by blowing compressed air of 4.9 kPa (50 gf/cm2, 0.71 psi) into port A while holding port B closed.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    V100135
    Air

    NOTICE:
    Do not attempt to wash the canister.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →