TERMINALS OF ECU
System information · Vehicles built from Jan 2012
| CHECK SEAT CLIMATE CONTROL ECU LH (w/ Climate Control Seat System) |


Disconnect the c35 seat climate control ECU LH connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c35-12 (B) - Body ground
G - Body ground
Battery power supply
Always
11 to 14 V
c35-13 (IG) - Body ground
G - Body ground
Ignition power supply
Engine switch on (IG)
11 to 14 V
c35-8 (H5) - c35-19 (HS)
LG - BE
Front seat cushion heater LH (temperature sensor) signal
25°C
10 kΩ
c35-15 (V5) - c35-6 (VS)
B - G
Front seat heater switch (LH side) signal
Front seat heater switch (LH side) max hot
Below 100 Ω
c35-15 (V5) - c35-17 (VG)
B - BR
Front seat heater switch (LH side) signal
Always
4 to 6 kΩ
c35-3 (GND) -Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the c35 seat climate control ECU LH connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c35-11 (B) - c35-2 (E)
W - B
Front seat heater LH drive signal
Engine switch on (IG), front seat heater LH operating
11 to 14 V
Engine switch on (IG), front seat heater LH not operating
Below 1 V
c35-15 (V5) - Body ground
B - Body ground
Front seat heater switch (LH side) power supply
Engine switch on (IG)
4.7 to 5.2 V
c35-26 (IND) - Body ground
L - Body ground
Seat heater switch indicator light (LH side) illumination signal
Engine switch on (IG), front seat heater LH operating (seat heater switch indicator light [LH side] illuminated)
Below 1 V
Engine switch on (IG), front seat heater LH not operating (seat heater switch indicator light [LH side] not illuminated)
11 to 14 V
| CHECK SEAT CLIMATE CONTROL ECU RH (w/ Climate Control Seat System) |


Disconnect the c32 seat climate control ECU RH connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c32-12 (B) - Body ground
G - Body ground
Battery power supply
Always
11 to 14 V
c32-13 (IG) - Body ground
G - Body ground
Ignition power supply
Engine switch on (IG)
11 to 14 V
c32-8 (H5) - c32-19 (HS)
LG - BE
Front seat cushion heater RH (temperature sensor) signal
25°C
10 kΩ
c32-15 (V5) - c32-6 (VS)
B - W
Front seat heater switch (RH side) signal
Front seat heater switch (RH side) max hot
Below 100 Ω
c32-15 (V5) - c32-17 (VG)
B - BR
Front seat heater switch (RH side) signal
Always
4 to 6 kΩ
c32-3 (GND) -Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the c32 seat climate control ECU RH connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c32-11 (B) - c32-2 (E)
W - B
Front seat heater RH drive signal
Engine switch on (IG), front seat heater RH operating
11 to 14 V
Engine switch on (IG), front seat heater RH not operating
Below 1 V
c32-15 (V5) - Body ground
B - Body ground
Front seat heater switch (RH side) power supply
Engine switch on (IG)
4.7 to 5.2 V
c32-26 (IND) - Body ground
R - Body ground
Seat heater switch indicator light (RH side) illumination signal
Engine switch on (IG), front seat heater RH operating (seat heater switch indicator light [RH side] illuminated)
Below 1 V
Engine switch on (IG), front seat heater RH not operating (seat heater switch indicator light [RH side] not illuminated)
11 to 14 V