ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
- NOTICE:
- Water or deteriorated brake fluid. Sealed areas or brake fluid may deteriorate and lead to fluid leaks or decreased efficiency.
| CHECK FLUID LEVEL IN RESERVOIR |
Turn the ignition switch off and fully depress the brake pedal 40 times or more to release the pressure in the accumulator.

- HINT:
- When the pressure in the accumulator is released, the pedal stroke will lengthen.
Adjust the fluid level so that it is at the MAX line.
- HINT:
- When the ignition switch is turned on, brake fluid is sent to the accumulator and the fluid level decreases by approximately 10 mm (0.394 in.) from the MAX line.
- Brake Fluid:
- SAE J1703 or FMVSS No. 116 DOT3
