2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT THERMOSTAT

HINT:
A167079E01
The valve opening temperature is inscribed on the thermostat.

  1. P000436E01
    Immerse the thermostat in water and then gradually heat the water.

  1. Check the valve opening temperature.

    Valve opening temperature:
    74 to 78°C (165 to 172°F)

    1. If the valve opening temperature is not within the specified range, replace the thermostat.

  1. A167080E01
    Check the valve lift.

    Valve lift:
    10 mm (0.394 in.) or more at 90°C (194°F)

    1. If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 40°C (104°F)).

    1. If not fully closed, replace the thermostat.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →