The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011from Jan 2012
INSPECTION PROCEDURE
1. CHECK CELLULAR PHONE
Check if the voice on the other side can be heard using a cellular phone.
OK:
Voice can be heard.
NG
REPAIR OR REPLACE CELLULAR PHONE
OK
2. CHECK AUDIO AND VISUAL SYSTEM
Check that sound from the audio system can be heard from the front speakers.
OK:
Sound from the audio system can be heard.
HINT:
If sound from the audio system cannot be heard, proceed to "No sound can be heard from speakers. (Audio is mute.)" in Problem Symptoms Table (Click here).
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK
3. CHECK SETTINGS
Check that the received voice level setting on the cellular phone is not too low.
OK:
The received voice level setting is not too low.
NG
SET VOLUME TO HIGH
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)