2011-2013 Land Cruiser · Service Manual Brake

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


OPERATION CHECK
  1. Disconnect the union to connector tube hose from the vacuum pump.

  1. C172876E01
    Connect a vacuum gauge to the vacuum pump.

  1. Start the engine and warm it up for more than 2 minutes.

  1. With the engine idling, measure the negative pressure of the vacuum pump.

    Standard Pressure:
    More than 86.7 kPa (650 mmHg, 25.6 in.Hg)

    HINT:
    It is necessary to replace the vacuum pump assembly every 200000 km (124000 miles).

  1. Remove the vacuum gauge from the vacuum pump.

  1. Connect the union to connector tube hose to the vacuum pump.

← COMPONENTS (from Sep 2011)REMOVAL (Sep 2011 – Dec 2011) →