2011-2013 Land Cruiser · Service Manual Drivetrain

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL CLUTCH PEDAL SPRING HOLDER

C173233E01
  1. Apply MP grease to the contact surface of the spring holder.

  1. Install the clutch pedal spring holder to the clutch pedal bracket.


2. INSTALL CLUTCH PEDAL BUSH

C173232E01
  1. Apply MP grease to the inside and outside of 2 new bushes.

  1. Install the 2 bushes to the clutch pedal.


3. INSTALL CLUTCH PEDAL SHAFT COLLAR

C173231E01
  1. Apply MP grease to the clutch pedal shaft collar.

  1. Install the clutch pedal shaft collar to the clutch pedal.


4. INSTALL NO. 2 CLUTCH PEDAL CUSHION

C179832
  1. Install the clutch pedal cushion to the clutch pedal.


5. INSTALL CLUTCH PEDAL PAD
  1. Install the clutch pedal pad to the clutch pedal.


6. INSTALL CLUTCH PEDAL SUB-ASSEMBLY

C173234
  1. Install the clutch pedal to the clutch pedal bracket with the nut, washer and bolt.

    Torque:
    34 N*m{ 350 kgf*cm , 25 ft.*lbf }

    HINT:
    Install the bolt from the right side of the vehicle.


7. INSTALL CLUTCH PEDAL SPRING

C173235E01
  1. Apply MP grease to the pins of the clutch pedal bracket and clutch pedal.

  1. Connect the spring to the clutch pedal, and connect the spring to the clutch pedal bracket with a new E-ring.


8. INSTALL TURNOVER SPRING

C173236E01
  1. Apply MP grease to the contact surfaces of the spring holder, clutch pedal and spring.

  1. Move the pedal to the full stroke position.

  1. Install the spring to the clutch pedal and spring holder.


9. INSTALL CLUTCH PEDAL BRACKET SUB-ASSEMBLY

  1. C173249
    Install the clutch pedal bracket to the vehicle, and then temporarily install the bolt.

    HINT:
    The bolt will be tightened to a torque specification in the "Install Clutch Master Cylinder Assembly" procedure.

  1. Connect the clutch start switch connector.

  1. w/ Cruise Control System:
    Connect the clutch switch connector.


10. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
  1. Install the clutch master cylinder assembly (Click here).

← ADJUSTMENT (from Sep 2011)COMPONENTS (from Sep 2011) →