2011-2013 Land Cruiser · Service Manual Brake

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF BRAKE BOOSTER ACCUMULATOR ASSEMBLY

  1. C177092E01
    Place the brake booster accumulator assembly in a vise and cover it with cloth.

  1. Using a saw, cut the brake booster accumulator body between A and B as shown in the illustration to discharge the gas inside.

    CAUTION:
    1. Cover with a piece of cloth when working because gas may blow out.
    2. Cut the accumulator carefully, not abruptly.
    3. Wear protective glasses.

  1. When the outer body of the brake booster accumulator is cut, gas and liquid discharge.

    HINT:
    The gas is colorless, odorless and non-poisonous.

← INSTALLATION (from Jan 2012)COMPONENTS (from Sep 2011) →