2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT OIL PUMP RELIEF VALVE

  1. A134833
    Coat the valve with engine oil, then check that it falls smoothly into the valve hole by its own weight.
    If it does not, replace the relief valve. If necessary, replace the oil pump assembly.


INSPECT OIL PUMP ROTOR SET

  1. A134834E03
    Place the drive and driven rotors into the timing chain cover with the matchmarks facing upward.

  1. Check the rotor tip clearance.

    1. A134835
      Using a feeler gauge, measure the clearance between the drive and driven rotor tips.

      Standard tip clearance:
      0.06 to 0.16 mm (0.00236 to 0.00630 in.)

      Maximum tip clearance:
      0.16 mm (0.00630 in.)

      If the clearance is more than the maximum, replace the timing chain cover sub-assembly.

  1. Check the rotor side clearance.

    1. A134836
      Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge.

      Standard side clearance:
      0.03 to 0.09 mm (0.00118 to 0.00354 in.)

      Maximum side clearance:
      0.09 mm (0.00354 in.)

      If the clearance is more than the maximum, replace the timing chain cover sub-assembly.

  1. Check the rotor body clearance.

    1. A134837
      Using a feeler gauge, measure the clearance between the driven rotor and body.

      Standard body clearance:
      0.250 to 0.325 mm (0.00984 to 0.0128 in.)

      Maximum body clearance:
      0.325 mm (0.0128 in.)

      If the clearance is more than the maximum, replace the timing chain cover sub-assembly.

← DISASSEMBLY (from Jan 2012)INSPECTION (from Jan 2012) →