DISASSEMBLY
Removal / installation · Vehicles built from Sep 2011
| 1.
REMOVE REAR DISC BRAKE BLEEDER PLUG CAP |
|
| 2.
REMOVE REAR DISC BRAKE BLEEDER PLUG |
|
| 3.
REMOVE CYLINDER BOOT |
 |
- Using a screwdriver, remove the cylinder boot from the cylinder.
- HINT:
- Tape the screwdriver tip before use.
| 4.
REMOVE REAR DISC BRAKE PISTON |
 |
- Place a piece of cloth or a similar object between the piston and cylinder.
Use compressed air to remove the piston from the cylinder.
- CAUTION:
- Do not place your fingers in front of the piston when using compressed air.
| 5.
REMOVE PISTON SEAL |
 |
- Using a screwdriver, remove the piston seal from the cylinder.
- NOTICE:
- Do not damage the inner cylinder and cylinder groove.
- HINT:
- Tape the screwdriver tip before use.