2011-2013 Land Cruiser · Service Manual Drivetrain

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL REAR PROPELLER SHAFT

  1. C172481E01
    Align the matchmarks on the propeller shaft flange and transfer.

  1. Connect the propeller shaft with the 4 washers and 4 nuts.

    Torque:
    88 N*m{ 900 kgf*cm , 65 ft.*lbf }

  1. C178527E01
    Align the matchmarks on the propeller shaft flange and rear differential.

  1. Install the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

    Torque:
    88 N*m{ 900 kgf*cm , 65 ft.*lbf }


2. INSTALL TRANSFER HEAT INSULATOR

  1. C171487
    Install the insulator with the 4 bolts.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }

← REASSEMBLY (from Sep 2011)PROBLEM SYMPTOMS TABLE (Sep 2011 – Dec 2011) →