2011-2013 Land Cruiser · Service Manual Suspension

Indicator Circuit

Circuit diagnosis · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

DESCRIPTION

The multi-information display in the combination meter displays the vehicle height, the state of the height control OFF switch, and system malfunctions. To display items, the multi-information display uses CAN communication between the combination meter and suspension control ECU via the gateway ECU.
C177230E01

INSPECTION PROCEDURE


1. CHECK ECUS CONNECTED TO CAN BUS
  1. Turn the engine switch off.

  1. Connect the intelligent tester to the DLC3.

  1. Check the ECUs connected to the CAN bus for LHD (Click here) or for RHD (Click here).

    Result 
    Result
    Proceed to
    No malfunction appears
    A
    Malfunction appears (for LHD)
    B
    Malfunction appears (for RHD)
    C



B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)


← Indicator Circuit (Sep 2011 – Dec 2011)ECU Power Source Circuit (Sep 2011 – Dec 2011) →