INSPECTION
Inspection · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror) |
![]() ![]() |
Inspect the outer mirror switch assembly.
Select "L" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
3 (MLV) - 4 (B)
7 (M+) - 8 (E)
Up
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
3 (MLV) - 8 (E)
7 (M+) - 4 (B)
Down
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
9 (MLH) - 4 (B)
7 (M+) - 8 (E)
Left
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
9 (MLH) - 8 (E)
7 (M+) - 4 (B)
Right
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
Select "R" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
2 (MRV) - 4 (B)
7 (M+) - 8 (E)
Up
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
2 (MRV) - 8 (E)
7 (M+) - 4 (B)
Down
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
10 (MRH) - 4 (B)
7 (M+) - 8 (E)
Left
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
10 (MRH) - 8 (E)
7 (M+) - 4 (B)
Right
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)
Light comes on
| INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror) |
![]() ![]() |
Inspect the outer mirror switch assembly.
Select "L" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
8 (MSW) - 9 (E)
L switch
L position
10 kΩ or higher
Neutral position
10 kΩ or higher
7 (M+) - 9 (E)
Up
Pressed
95 to 105 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Down
Pressed
446 to 493 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Left
Pressed
760 to 840 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Right
Pressed
237 to 262 Ω
Not pressed
10 kΩ or higher
Select "R" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
8 (MSW) - 9 (E)
R switch
R position
Below 1 Ω
Neutral position
10 kΩ or higher
7 (M+) - 9 (E)
Up
Pressed
95 to 105 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Down
Pressed
446 to 493 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Left
Pressed
760 to 840 Ω
Not pressed
10 kΩ or higher
7 (M+) - 9 (E)
Right
Pressed
237 to 262 Ω
Not pressed
10 kΩ or higher
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)
Light comes on
| INSPECT RETRACTABLE OUTER MIRROR SWITCH (w/ Retract Mirror) |
Inspect the retractable outer mirror switch.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
5 (E) - 6 (MR)
Pressed
(Retracts)
Below 1 Ω
Not pressed
10 kΩ or higher
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 8 (ILL+)
Battery negative (-) → Terminal 7 (ILL-)
Light comes on


