TERMINALS OF ECU
System information · Vehicles built from Jan 2012
| CHECK SEAT CLIMATE CONTROL ECU LH |


Disconnect the c35 seat climate control ECU LH connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c35-12 (B) - Body ground
G - Body ground
Battery power supply
Always
11 to 14 V
c35-13 (IG) - Body ground
G - Body ground
Ignition power supply
Engine switch on (IG)
11 to 14 V
c35-15 (V5) - c35-6 (VS)
B - G
Front seat heater switch (LH side) signal
Front seat heater switch (LH side) (blower on HI)
Below 100 Ω
c35-15 (V5) - c35-17 (VG)
B - BR
Front seat heater switch (LH side) signal
Always
4 to 6 kΩ
c35-3 (GND) -Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the c35 seat climate control ECU LH connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c35-15 (V5) - Body ground
B - Body ground
Front seat heater switch (LH side) power supply
Engine switch on (IG)
4.7 to 5.2 V
c35-26 (IND) - Body ground
L - Body ground
Seat heater switch indicator light (LH side) illumination signal
Engine switch on (IG), front LH blower fan operating (seat heater switch indicator light [LH side] illuminated)
Below 1 V
Engine switch on (IG), front LH blower fan not operating (seat heater switch indicator light [LH side] not illuminated)
11 to 14 V
c35-24 (BCS) - c35-1 (BFC-)
L - B
Front climate control blower LH drive signal
Engine switch on (IG), front seat heater switch (LH side) off
Below 1 V
Engine switch on (IG), front seat heater switch (LH side) on (blower on HI)
12.6 to 13.4 V
| CHECK SEAT CLIMATE CONTROL ECU RH |


Disconnect the c32 seat climate control ECU RH connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c32-12 (B) - Body ground
G - Body ground
Battery power supply
Always
11 to 14 V
c32-13 (IG) - Body ground
G - Body ground
Ignition power supply
Engine switch on (IG)
11 to 14 V
c32-15 (V5) - c32-6 (VS)
B - W
Front seat heater switch (RH side) signal
Front seat heater switch (RH side) (blower on HI)
Below 100 Ω
c32-15 (V5) - c32-17 (VG)
B - BR
Front seat heater switch (RH side) signal
Always
4 to 6 kΩ
c32-3 (GND) -Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the c32 seat climate control ECU RH connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
c32-15 (V5) - Body ground
B - Body ground
Front seat heater switch (RH side) power supply
Engine switch on (IG)
4.7 to 5.2 V
c32-26 (IND) - Body ground
R - Body ground
Seat heater switch indicator light (RH side) illumination signal
Engine switch on (IG), front RH blower fan operating (seat heater switch indicator light [RH side] illuminated)
Below 1 V
Engine switch on (IG), front RH blower fan not operating (seat heater switch indicator light [RH side] not illuminated)
11 to 14 V
c32-24 (BCS) - c32-1 (BFC-)
L - B
Front climate control blower RH drive signal
Engine switch on (IG), front seat heater switch (RH side) off
Below 1 V
Engine switch on (IG), front seat heater switch (RH side) on (blower on HI)
12.6 to 13.4 V