2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH

  1. B184535E01
    Horizontally fix the stay in a vise with the piston-rod pulled out.

  1. Using a metal saw, gradually cut any area between A and B to release the gas.

    Standard Measurement:
    Area
    Specified Condition
    a
    150 mm (5.91 in.)
    b
    20 mm (0.787 in.)

    CAUTION:
    As metal debris may be blown outward by the gas, you must:
    1. Wear protective glasses.
    2. Cover the area being cut.

    NOTICE:
    The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.

← INSTALLATION (from Sep 2011)COMPONENTS (from Sep 2011) →