REMOVAL
Removal / installation · Vehicles built from Sep 2011
- NOTICE:
- While holding the back door, remove the back door support.
- Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.
- Do not push sideways on the rod because the rod may bend.
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
| 1.
REMOVE BACK DOOR STAY ASSEMBLY LH |
 |
- Remove the 2 bolts and stay.
- CAUTION:
- Remove the door stay while supporting the back door with one hand.
- Remove the bolt and stay.
- CAUTION:
- Remove the door stay while supporting the back door with one hand.