TERMINALS OF ECU
System information · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) |


Disconnect the 2A, 2B and 2D ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
2B-20 (BATB) - Body ground
L - Body ground
Battery power supply
Always
11 to 14 V
2A-1 (ACC) - Body ground
B - Body ground
ACC power supply
Ignition switch ACC
11 to 14 V
2A-1 (ACC) - Body ground
B - Body ground
ACC power supply
Ignition switch off
Below 1 Ω
2A-1 (IG) - Body ground
B - Body ground
IG power supply
Ignition switch ON
11 to 14 V
2A-1 (IG) - Body ground
B - Body ground
IG power supply
Ignition switch off
Below 1 Ω
2D-62 (GND2) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Reconnect the 2A, 2B and 2D ECU connectors.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E1-24 (DCTY) - Body ground
L*1 - Body ground
Y*2 - Body ground
Driver side door courtesy switch input
Driver side door open
Below 1 V
E1-24 (DCTY) - Body ground
L*1 - Body ground
Y*2 - Body ground
Driver side door courtesy switch input
Ignition switch off, and driver side door courtesy switch off
Pulse generation
E2-21 (PCTY) - Body ground
Y*1 - Body ground
L*2 - Body ground
Front passenger side door courtesy switch input
Front passenger side door open
Below 1 V
E2-21 (PCTY) - Body ground
Y*1 - Body ground
L*2 - Body ground
Front passenger side door courtesy switch input
Ignition switch off, and passenger side door courtesy switch off
Pulse generation
2C-2 (LCTY) - Body ground
W - Body ground
Rear door LH courtesy light switch input
Rear door LH open
Below 1 V
2C-2 (LCTY) - Body ground
W - Body ground
Rear door LH courtesy light switch input
Ignition switch off, and rear LH side door courtesy switch off
Pulse generation
E1-17 (RCTY) - Body ground
G - Body ground
Rear door RH courtesy light switch input
Rear door RH open
Below 1 V
E1-17 (RCTY) - Body ground
G - Body ground
Rear door RH courtesy light switch input
Ignition switch off, and rear RH side door courtesy switch off
Pulse generation
E2-25 (BCTY) - Body ground
W - Body ground
Back door courtesy light switch input
Back door open
Below 1 V
E2-25 (BCTY) - Body ground
W - Body ground
Back door courtesy light switch input
Ignition switch off, and back door closed
Pulse generation
E1-9 (LSWD) - Body ground
BR - Body ground
Driver side door lock position switch input
Driver side door unlocked
Below 1 V
E1-9 (LSWD) - Body ground
BR - Body ground
Driver side door lock position switch input
Ignition switch off, all doors closed and driver side door locked
Pulse generation
E2-27 (LSWP) - Body ground
Y*1 - Body ground
BR*2 - Body ground
Front passenger side door lock position switch input
Front passenger side door unlocked
Below 1 V
E2-27 (LSWP) - Body ground
Y*1 - Body ground
BR*2 - Body ground
Front passenger side door lock position switch input
Ignition switch off, all doors closed and passenger side door locked
Pulse generation
2C-1 (LSWL) - Body ground
BR - Body ground
Rear door LH lock position switch input
Rear door LH unlocked
Below 1 V
2C-1 (LSWL) - Body ground
BR - Body ground
Rear door LH lock position switch input
Ignition switch off, all doors closed and rear door LH locked
Pulse generation
E2-5 (LSWR) - Body ground
BR - Body ground
Rear door RH lock position switch input
Rear door RH unlocked
Below 1 V
E2-5 (LSWR) - Body ground
BR - Body ground
Rear door RH lock position switch input
Ignition switch off, all doors closed and rear door RH locked
Pulse generation
E2-2 (LSWB) - Body ground
LG - Body ground
Back door lock position switch input
Back door lock position switch off
Below 1 V
E2-2 (LSWB) - Body ground
LG - Body ground
Back door lock position switch input
Back door lock position switch on
Pulse generation
E2-10 (PRG) - Body ground
R - Body ground
Door control receiver output
Key in ignition key cylinder → No key in ignition key cylinder
Pulse generation
E2-12 (RDA) - Body ground
L - Body ground
Door control receiver input
No key in ignition key cylinder, all doors closed and transmitter switch off → on
Pulse generation
E4-7 (BZR) - Body ground
LG - Body ground
Wireless door lock buzzer signal
Wireless door lock buzzer off
Below 1 V
E4-7 (BZR) - Body ground
LG - Body ground
Wireless door lock buzzer signal
Wireless door lock buzzer on
Pulse generation
E3-4 (HAZ) - Body ground
BE - Body ground
Hazard warning light output signal
Hazard warning signal switch off
Below 1 V
E3-4 (HAZ) - Body ground
BE - Body ground
Hazard warning light output signal
Hazard warning signal switch on
11 to 14 V
E4-5 (KSW) - Body ground
BR - Body ground
Unlock warning switch input
No key in ignition key cylinder
Below 1 V
E4-5 (KSW) - Body ground
BR - Body ground
Unlock warning switch input
Key in ignition key cylinder
Pulse generation
- HINT:
- *1: for LHD
- *2: for RHD
| CHECK DOOR CONTROL RECEIVER |
![]() ![]() |
Disconnect the L47 receiver connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
L47-1 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
L47-5 (+B) - Body ground
B - Body ground
Battery power supply
Always
4.6 to 5.4 V
- If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
