Cassette Tape cannot be Ejected
Circuit diagnosis · Vehicles built from Sep 2011
INSPECTION PROCEDURE
| 1. CHECK OPERATION |
Press "EJECT" and check the operation.
Press the cassette tape EJECT switch of the radio receiver assembly for 2 seconds or more and check that the cassette tape is ejected.
- OK:
- The cassette tape is ejected.
|
|
||||
| OK | |
| 2. CHECK CASSETTE TAPE |
Check the cassette tape.
Check that the ejected cassette tape does not have a peeled label, a cassette body deformation or any other defect.
- OK:
- No fault on the cassette tape.
|
|
||||
| OK | |
| 3. REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK |
Replace the cassette tape with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
