2011-2013 Land Cruiser · Service Manual Brake

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
  1. Install the stop light switch mounting adjuster to the brake pedal support.


2. INSTALL BRAKE PEDAL PAD

  1. C177100E01
    Install the brake pedal pad onto the brake pedal.


3. INSTALL BRAKE PEDAL RETURN SPRING
  1. Apply a light coat of lithium soap base glycol grease to inner surface of the hole in the brake pedal support assembly.

  1. C177101E01
    Install the brake pedal return spring to the brake pedal support assembly.

← ADJUSTMENT (from Sep 2011)INSTALLATION (Sep 2011 – Dec 2011) →