2011-2013 Land Cruiser · Service Manual Suspension

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH
  1. Set the front shock absorber assembly on its side.

  1. Fully extend the shock absorber rod.

  1. C173246E01
    Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

    CAUTION:
    Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.

    NOTICE:
    The gas is colorless, odorless and nonpoisonous.

← INSTALLATION (from Jan 2012)COMPONENTS (Sep 2011 – Dec 2011) →