Radio Receiver Power Source Circuit
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This circuit provides power to the radio receiver.WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuse for circuits related to this system before performing the following inspection procedure.
| 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - BATTERY AND BODY GROUND) |
Disconnect the F35 receiver connector.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
F35-7 (GND) - Body ground
Always
Below 1 Ω
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
Condition
Specified Condition
F35-4 (B) - Body ground
Always
11 to 14 V
F35-3 (ACC) - Body ground
Ignition switch ACC
Text in Illustration *1
Front view of wire harness connector
(to Radio Receiver)
|
|
||||
| OK | ||
| ||
