REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for Tailgate Type Back Door) |
 |
(Click here)
| 2.
REMOVE NO. 1 SWITCH HOLE BASE (for Double Swing-out Type Back Door) |
 |
(Click here)
| 3.
REMOVE VSC OFF SWITCH |
 |
Disconnect the VSC OFF switch connector.
- for Tailgate Type Back Door:
Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel.
- HINT:
- Tape the screwdriver tip before use.
- for Double Swing-out Type Back Door:
Detach the 2 claws and remove the VSC OFF switch form the No. 1 switch hole base.