REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE FRONT FENDER APRON SEAL LH
|
 |
- Using a clip remover, remove the 4 clips and fender apron seal.
| 3.
REMOVE FRONT FENDER APRON SEAL REAR LH
|
 |
- Using a clip remover, remove the 4 clips and fender apron seal.
| 4.
REMOVE STARTER ASSEMBLY |
 |
Disconnect the terminal cap.
- Remove the nut and disconnect the starter wire.
Disconnect the starter connector.
- Remove the 2 bolts and starter.