INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT QUICK HEATER ASSEMBLY |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
A1 - B1
23 to 25°C (73 to 77°F)
0.5 to 2.5 Ω
A2 - B1
23 to 25°C (73 to 77°F)
0.5 to 2.5 Ω
A2 - B2
23 to 25°C (73 to 77°F)
0.5 to 2.5 Ω
A3 - B2
23 to 25°C (73 to 77°F)
0.5 to 2.5 Ω
- If the result is not as specified, replace the quick heater assembly (PTC heater assembly).
Text in Illustration *a
Component without harness connected
(Quick Heater Assembly (PTC Heater Assembly)
