2011-2013 Land Cruiser · Service Manual Steering

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jan 2012


CHECK DTC
  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / PPS / Trouble codes.

  6. Read the DTCs by following the display on the GTS.


CLEAR DTC
  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / PPS / Trouble codes.

  6. Clear the DTCs by following the display on the GTS.

  7. Turn the engine switch off.

  8. Disconnect the GTS from the DLC3.

← DIAGNOSIS SYSTEM (from Jan 2012)FAIL-SAFE CHART (from Jan 2012) →