INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY |
- NOTICE:
- Avoid physical shocks to the accelerator pedal sensor assembly.
- Do not disassemble the accelerator pedal sensor assembly.
- Avoid physical shocks to the accelerator pedal sensor assembly.
Install the accelerator pedal sensor with the 2 nuts.

- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
Connect the accelerator pedal position sensor connector.
| 2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER (w/ Floor Under Cover) |
![]() ![]() |
Connect the connectors.
Attach the 3 claws to install the No. 1 instrument panel under cover.
Install the 2 screws.

