ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT/ Data List / Primary / Accel Sens. No.1 Volt % and Accel Sens. No.2 Volt %.
Read the value displayed on the tester.
- Standard Value:
Tester Display
Condition
Specified Condition
Accel Sens. No.1 Volt %
Released
10 to 22%
Depressed
52 to 90%
Accel Sens. No.2 Volt %
Released
24 to 40%
Depressed
68 to 99%
