DISASSEMBLY
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE VALVE |
 |
- HINT:
- Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.
- Place the cylinder head on a wooden block.
Using SST, compress the inner compression spring and remove the valve spring retainer lock.
- SST
- 09202-70020
(09202-00010)
Remove the inner compression spring, valve spring retainer and valve.
| 2.
REMOVE VALVE STEM OIL SEAL |
 |
- Using pliers, remove the valve stem oil seal.
| 3.
REMOVE VALVE SPRING SEAT PLATE WASHER |
 |
- Using compressed air and a magnetic finger, remove the valve spring seat plate washer by blowing air.
| 4.
REMOVE NOZZLE HOLDER CLAMP SEAT |
 |