REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Remove the 2 nuts and V-bank cover.

| 2. REMOVE AIR CLEANER HOSE ASSEMBLY |
Disconnect the vacuum transmitting hose and No. 2 ventilation hose.

Loosen the 2 hose clamps.
Remove the air cleaner hose.
| 3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
![]() ![]() |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.
| 4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 5. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 10 bolts and No. 1 engine under cover.

| 6. REMOVE FAN & GENERATOR V BELT |
Loosen the belt tension by turning the belt tensioner counterclockwise, and then remove the fan and generator V belt.

- HINT:
- The pulley bolt for the belt tensioner has left-hand thread.

