REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCHARGE FUEL SYSTEM PRESSURE
|
 |
(Click here)
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3.
REMOVE V-BANK COVER SUB-ASSEMBLY
|
 |
- Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
Text in Illustration
*1
|
Bracket
|
*2
|
Hook
|
*3
|
Pin
|
*4
|
Grommet
|
| 4.
REMOVE AIR CLEANER HOSE ASSEMBLY
|
 |
- Disconnect the vacuum hose and No. 2 ventilation hose.
Loosen the 2 hose clamps.
Remove the air cleaner hose.
| 5.
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
 |
- Disconnect the No. 2 fuel tube from the pressure regulator (Click here).
- CAUTION:
- Put a cloth or equivalent under the pressure regulator.
- Disconnect the vacuum sensing hose from the pressure regulator.
- Remove the 2 bolts, and pull out the pressure regulator.
Remove the O-ring from the pressure regulator.