2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Sep 2011

Power Steering Fluid 
Fluid level rise (Maximum)
5.0 mm (0.197 in.)
Fluid pressure at idle speed with valve closed
10000 to 10700 kPa (102.0 to 109.0 kgf/cm2, 1450 to 1551 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
10000 to 10700 kPa (102.0 to 109.0 kgf/cm2, 1450 to 1551 psi)
Vane Pump 
Vane pump shaft and vane pump housing oil clearance (Maximum)
0.07 mm (0.00276 in.)
Vane plate thickness (Standard)
1.405 to 1.411 mm (0.0553 to 0.0556 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum)
0.03 mm (0.00118 in.)
Compression spring free length (Minimum)
31.3 mm (1.23 in.)
Vane pump rotating torque
0.3 N*m (3 kgf*cm, 2 in.*lbf) or less
← TORQUE SPECIFICATIONS (from Sep 2011)TORQUE SPECIFICATIONS (Sep 2011 – Dec 2011) →