2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Sep 2011

MAF Meter (Intake Air Temperature Sensor) 
Standard resistance
4 (THA) - 5 (E2)
-20°C (-4°F)
12.5 to 16.9 kΩ
20°C (68°F)
2.19 to 2.67 kΩ
60°C (140°F)
0.50 to 0.68 kΩ
Camshaft Timing Oil Control Valve 
Standard resistance
1 - 2
20°C (68°F)
6.9 to 7.9 Ω
Engine Coolant Temperature Sensor 
Standard resistance
1 - 2
Approximately 20°C (68°F)
2.32 to 2.59 kΩ
Approximately 80°C (176°F)
0.310 to 0.326 kΩ
Throttle Control Motor 
Standard resistance
1 (M-) - 2 (M+)
20°C (68°F)
0.3 to 100 Ω
Knock Sensor 
Standard resistance
1 - 2
20°C (68°F)
120 to 280 kΩ
Air Fuel Ratio Sensor (for Bank 1 sensor 1) 
Standard resistance
1 (HA1A) - 2 (+B)
20°C (68°F)
1.8 to 3.4 Ω
Air Fuel Ratio Sensor (for Bank 2 sensor 1) 
Standard resistance
1 (HA2A) - 2 (+B)
20°C (68°F)
1.8 to 3.4 Ω
Heated Oxygen Sensor (for Bank 1 sensor 2) 
Standard resistance
1 (HT1B) - 2 (+B)
20°C (68°F)
11 to 16 Ω
Heated Oxygen Sensor (for Bank 2 sensor 2) 
Standard resistance
1 (HT2B) - 2 (+B)
20°C (68°F)
11 to 16 Ω
Spark Plug 
Recommended spark plug
DENSO made: SK20HR11
Correct electrode gap for new spark plug
1.0 to 1.1 mm (0.039 to 0.043 in.)
Maximum electrode gap for used spark plug
1.3 mm (0.051 in.)
Standard insulation resistance
10 MΩ or higher
← TORQUE SPECIFICATIONS (from Jan 2012)TORQUE SPECIFICATIONS (from Sep 2011) →