2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built Sep 2011 – Dec 2011

Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard amperage
10 A or less
Standard voltage
13.2 to 14.8 V
(when engine speed at 2,000 rpm)
Charging circuit with load
Standard amperage
30 A or higher
Generator rotor
Standard resistance
between the slip rings
130 A type:
2.3 to 2.7 Ω at 20°C (68°F)
150 A type:
1.5 to 1.9 Ω at 20°C (68°F)
between the slip ring and rotor
10 kΩ or higher
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14.0 mm (0.551 in.)
Generator brush holder
Standard exposed length
10.5 mm (0.413 in.)
Minimum exposed length
4.5 mm (0.177 in.)
← TORQUE SPECIFICATIONS (from Jan 2012)TORQUE SPECIFICATIONS (Sep 2011 – Dec 2011) →