2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Jan 2012

Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard current
10 A or less
Standard voltage
13.2 to 14.8 V
(when engine speed at 2000 rpm)
Charging circuit with load
Standard current
30 A or higher
Generator rotor
Standard resistance
Slip ring - Slip ring
(for 130 A Type)
2.3 to 2.7 Ω at 20°C (68°F)
Slip ring - Slip ring
(for 150 A Type)
1.5 to 1.9 Ω at 20°C (68°F)
Standard resistance
Slip ring - Rotor core
10 kΩ or higher
Standard diameter
14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter
14.0 mm (0.551 in.)
Generator brush holder
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)
← TORQUE SPECIFICATIONS (from Jan 2012)TORQUE SPECIFICATIONS (from Jan 2012) →