REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for both the RH and LH sides.
- The procedures listed below are for the LH side.
| 1.
REMOVE FRONT WIPER BLADE LH |
 |
- Remove the wiper blade holder.
Remove the wiper blade as shown in the illustration.
| 2.
REMOVE WIPER RUBBER LH |
 |
Detach the head part (large side) of the wiper rubber from the wiper blade.
- Remove the wiper rubber in the direction indicated by the arrow in the illustration.
- Remove the 2 wiper rubber backing plates from the wiper rubber.