2011-2013 Land Cruiser · Service Manual Vehicle Exterior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR WASHER NOZZLE

  1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

    Standard:
    Washer fluid hits the windshield in the area shown in the illustration.

    If the result is not as specified, replace the washer nozzle.

    E156017E01

    Standard Measurement:
    Area
    Specified Condition
    A
    65.8 mm (2.59 in.)
    B
    40.5 mm (1.59 in.)
    C
    44.9 mm (1.77 in.)

    If the result is not as specified, replace the rear washer nozzle.

← COMPONENTS (from Sep 2011)REMOVAL (Sep 2011 – Dec 2011) →